E20-520

4. What accurately describes the process of adding a Data Mover to an NS-series Celerra?

A. The NS system must be powered off

B. The Control Station must be powered off

C. The Data Mover is added non-disruptively

D. The existing Data Mover must be powered off

Answer: C

5. When using a Symmetrix in a Fibre Channel environment, how is the Fibre Channel WWN of the FA

determined?

A. Hardware manufacturer, system serial number, and FA slot ID

B. iSNS registration number, system serial number, and FA slot ID

C. Hardware manufacturer, system IP address, and FA serial number

D. iSNS registration number, system IP address, and FA serial number

Answer: A

6. What is a characteristic of Kerberos?

A. Uses access tokens to hold a user's SID

B. Key Distribution Center manages the keys

C. Security encryption used by authentication protocols

D. Provides encryption of passwords sent to Domain controllers

Answer: B

7. You are performing a Data Mover failover test of server_2 at a time that will pose minimal impact to

corporate users. After performing the failover, you verify that the standby Data Mover successfully mounts,

exports all file systems, and takes over as server_2.

Five minutes after the failover, users begin reporting that they can no longer access some of their shares.

After further investigation you find that, while most shares are accessible via the CIFS servers on server_2,

all shares exported through the "finance1" CIFS server are inaccessible. You also learn that the "finance2"

and "engineering1" CIFS servers on server_2 are working without problems.

What is the likely cause of the problem?

A. The CIFS service was not started on the standby Data Mover.

B. The CIFS service was not started for the "finance1" CIFS server.

C. New disks were added to the storage array but were never added to the configuration database for the

standby Data Mover.

D. The network cable of the standby Data Mover, associated with the "finance1" CIFS server, is assigned to

the incorrect VLAN.

Answer: D

Networked Storage - NS Implementation(E20-535) belongs to one of the Legato Cert certified test, if needs to obtain the Legato Cert certificate, you also need to participate in other related test, the details you may visit the Legato Cert certified topic, in there, you will see all related Legato Cert certified subject of examination.